Waterloo F1971 User Manual download pdf

OPERATOR’S MANUAL

FLOOR CABINET

IN THE UNITED STATES CALL 1-800-833-4405

FOR SERVICE PARTS. Outside the United States call your

local distributor. Please provide the Model Number when calling.

CAPACITIES

SERVICE PARTS

• The maximum weight for each shelf should be no more than

50 lbs. (evenly distributed).

• The maximum product weight including contents should be no

more than 300 lbs.

Waterloo Industries, 139 West Forest Hill Avenue, Oak Creek, WI 53154

Locating Model # Information

Model numbers and other information required for service parts is

located on a white label on the upper right hand corner of the unit.

• Periodically the surfaces should be cleaned with a mild

detergent and water.

• Grease and oil can be removed with most standard cleaning

uids. For safety, use a nonammable cleaning uid.

• Auto wax will preserve the unit’s luster nish. Apply the wax

as to a car. The wax will also help protect the unit against

scratches.

MAINTENANCE

SAFETY

DANGER is used to indicate a hazardous

situation which, if not avoided, will result in serious injury

or death.

WARNING indicates a hazardous situation which,

if not avoided, could result in serious injury or death.

CAUTION is used to indicate a hazardous situation

which, if not avoided, may result in minor injury, moderate

injury, or property damage.

CAUTION: Read and follow all Safety Rules and

Operating Instructions before rst use of this product.

DANGER

• DO NOT stand on this product. You may fall which

may cause personal injury.

• DO NOT mount this product on a truck bed or any

other moving object. This may cause personal injury or

product damage.

• DO NOT step on the shelves. You may fall which may

cause personal injury.

WARNING

• Use appropriate safety equipment when using power

and hand tools. Failure to do so may cause personal

injury or product damage.

• Use adequate manpower when assembling and moving

this unit. Failure to do so may cause personal injury or

product damage.

• DO NOT alter this product in any manner. This may

cause product damage or personal injury.

• Keep the product on level surfaces. The product may

become unstable and tip if stored or moved on an

un-level surface, which may cause personal injury

or product damage.

• Cabinet MUST be attached to a stud in a wood frame

wall. Failure to do so may cause personal injury or

product damage.

• Hardware is provided for wood frame wall use only.

Concrete or other surfaces will require other hardware

(not provided). Use appropriate hardware per your local

building codes. Failure to do so may cause personal injury

or product damage.

CAUTION

• Appropriately secure this product before moving it with

a forklift.

F1971

1 2 3 4 5 6 ... 15 16

Summary of Contents

Page 1 - OPERATOR’S MANUAL

OPERATOR’S MANUALFLOOR CABINET IN THE UNITED STATES CALL 1-800-833-4405 FOR SERVICE PARTS. Outside the United States call your local distributor. Plea

Page 2 - CARTON CONTENTS

HERRAMIENTAS NECESARIAS:Llave de DadoDado de 3/8"Dado Profundo de 7/16"Llave de Extremo Abierto de 7/16"EscuadraDestornillador PlanoDes

Page 3 - ASSEMBLY

ENSAMBLAJEProceso:• Coloca los (2) Paneles Posteriores con el reborde hacia arriba, como se muestra. (Usa el material del empaque para evitar rayon

Page 4

4Rebordes hacia la parte inferiorParte SuperiorArandelaPerno de CarroTuercaTornillo de Cabeza RedondeadaTuercaFigura 3Figura 3.1Proceso:• Inserta la

Page 5

5Proceso:• Inserta la Parte Inferior en el extremo inferior del ensamblaje y ja usando (4) Pernos de Carro de 1/4-20 x 5/8", (8)Tornillos de

Page 6

6Proceso:• Coloca los Remaches en los oricios ubicados en los paneles posteriores del gabinete.Artículos Necesarios:Remache a Presión (Cant.: 2)Re

Page 7 - OPERATION

7FUNCIONAMIENTOTornilloTuercaSoporte de MontajeTornillo• Alinea el gabinete con una viga. Ajusta las patas del Nivelador si es necesario.• Taladr

Page 8

Page 9 - MANUAL DEL USUARIO

TOOLS REQUIRED:Socket Wrench 3/8" Socket7/16" Deep-well Socket 7/16" Open End WrenchSquare Flathead ScrewdriverCross-tip Screw

Page 10 - CONTENIDO DE LA CAJA

ASSEMBLYProcess:• Place (2) Backs with anges up as shown. (Use packaging material to prevent scratches.)• Assemble (2) Backs, using (3) 1/4

Page 11 - ENSAMBLAJE

4Process:Note: Install top shelf rst.• Place the cabinet in its upright position.• Insert Shelf from bottom of unit.• Place in desired mounting l

Page 12

5Process:• Insert Bottom into lower end of assembly and attach using (4) 1/4-20 x 5/8" Carriage Bolt , (8) 1/4-20 x 3/4" Button Hea

Page 13

6ScrewDoor RightProcess:• Attach Grommets into holes provided in back panels of cabinet.Items Needed:Grommet (Qty: 2)GrommetGrommetProcess:• Pl

Page 14

OPERATIONScrew7NutMounting BracketScrewShelf Adjustment• Empty shelf.• Remove fasteners.• Rotate shelf upward and pull forward, as shown.• Mov

Page 15 - FUNCIONAMIENTO

Page 16

Waterloo Industries, 139 West Forest Hill Avenue, Oak Creek, WI 53154F1971MANUAL DEL USUARIOGABINETE DE PISO EN LOS ESTADOS UNIDOS, LLAMA AL 1-800-833

Comments to this Manuals

No comments

Waterloo F1971 User Manual

Browse online or download User Manual for Tools Waterloo F1971. Waterloo F1971 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Tools Waterloo F1971